Rebuild started with engine and swing arm!

We finally got the swing arm bearings in, and installed.  But when we were about to install the swing arm linkage, we found something that I totally forgot about...the bearings in those.  What is it with us and bearings?  Anyway, those are now on order too.  So we have the engine, swing arm and the electrical system installed.  It is starting to look like a motorcycle again!

 Bearing install with our special homemade tool!

Grease the bearing really good!

Bearings installed and swing arm ready to install

A little sanding on the holes so the bolts will fit

A lot more grease this time added to the swing arm pivot bolt

Add a little torque to the bolt

Add some electrical components...and this is what we ended the day with.

Great looking bike so far!

Here is the linkage that I forgot to bearings for.  Just trying to find out how to remove the bearings where there are two in the same opening.

Once the bearings for the linkage come in, we will take it and get the bearing pressed out and installed.  We are still waiting on the steering stem to come back from the Yamaha place so we can install it on the bike.  Hopefully it will be ready tomorrow...fingers crossed!